CELANEX 4002
CELANEX庐 PBTPBT-ICharacteristicsRegional availabilityProcessingInjection MouldingDelivery formPelletsSpecial characteristicsHigh impact or impact modifiedProduct information
ValueTest NormResin IdentificationPBT-I*** 1043Part Marking Code>PBT-I<*** 11469Rheological properties
ValueUnitTest NormMelt mass-flow rate4g/10min*** 1133Melt mass-flow rate, Temperature250掳CMelt mass-flow rate, Load2.16kgMoulding shrinkage, parallel1.8%*** 294-4, 2577Moulding shrinkage, normal1.7%*** 294-4, 2577Mechanical properties
ValueUnitTest NormTensile modulus1450MPa*** 527-1/-2Tensile stress at yield, 50mm/min32MPa*** 527-1/-2Tensile strain at yield, 50mm/min4%*** 527-1/-2Flexural modulus1450MPa*** 178Flexural strength50MPa*** 178Izod notched impact strength, 23掳C75kJ/m虏*** 180/1APoisson&锛�39;s ratio0.43[C][C]: CalculatedThermal properties
ValueUnitTest NormMelting temperature, 10掳C/min225掳C*** 11357-1/-3Temperature of deflection under load, 1.8 MPa49掳C*** 75-1/-2Physical/Other properties
ValueUnitTest NormDensity1240kg/m鲁*** 1183Injection
ValueUnitDrying RecommendedyesDrying Temperature120掳CDrying Time, Dehumidified Dryer4hProcessing Moisture Content鈮�0.02%Melt Temperature Optimum250掳CMin. melt temperature240掳CMax. melt temperature260掳CScrew tangential speed0.1 - 0.3m/sMold Temperature Optimum80掳CMin. mould temperature60掳CMax. mould temperature130掳C
Copyright 漏 2025 All rights reserve
